Hifiman HE6SE v2 : Mods and Stuff




This is a continuation of my previous review of the Adorama Edition of the Hifiman HE6SE and this article will focus on some of the simple mods I've made.


Headbands & Grills:


For physical mods, I've performed two thus far: A grill swap and a headband suspension strap addition.

Grills: 

The first simple mod to do is to just remove the grill from each cup. This is pretty simple to do. You can use your finger nail to remove the holding ring on each cup and it'll de-clip and pop off. Running it without a grill will open up the soundstage a bit and also increase sub-bass performance.

Here's a measurement of the two variables:


The bold gray line is the normal configuration with the default grills. The pink line is what it looks like without grills on at all. As you can see, the sub-bass rises a bit, and the mids are more evened out. 

Of course, some may prefer to have a grill in-place and one that is available to quickly purchase and use is this one that I use featuring a honeycomb pattern. It is linked below:


This grill measures pretty much identical to the grill-less measurement above. You can make your own with any grill material you find. People have used car grills, bird prevention grills, and other things you can find online or at your hardware store. Some have made 3D-Printed grills too!



Headband Mod:

When I first got this unit, the headband was a little uncomfortable, with a hot spot right in the center top of my head. Aside from that, I actually really like this headband, though it is a little heavy. One thing to help with both of these comfort nitpicks, is to create a suspension strap, similar to how the other Hifiman headbands have.

For this, I used a piece of leather from a local fabric/hobby store and trimmed it down to size. I then punched a couple small holes on either end and used twisty-ties to thread it through the holes and around the metal sliding part of the headband, as shown in the photo above. It works quite well, and adjusts with your head. I've found this helps comfort quite a bit. Someone more crafty can make something much better than me probably! :)


Headphone Pads

I've tried several pads on this unit in the past few weeks and there's been a few that I've kept and measured. Here are three of them:


The dashed-gray line is the Hifiman HE6SE V2 with Grill Mod and default Pali Pads.

Blue: Dekoni Elite Leather Pads for Hifiman

Purple: Defean Hybrid Leather Pads for Hifiman

Green: Dekoni Elite Hybrid Pads for Fostex TH610

One other pad that I did not put on this chart was the Hifiman Focus pads. These pads measure identically to the Pali pads but use a velour fabric for the skin-touching top surface instead of the perforated and itchier fabric material on the Pali pads. I find these are perfect for sound and comfort for my tastes.

Comments

  1. The new grills look absolutely awesome, and it measures really well. I wonder if Sundara would respond similarly.

    ReplyDelete
    Replies
    1. I haven't tried it with Sundara yet, and it's been a few years since I've tried the Sundara so I am unable to let you know. The Sundara has a pretty open grill already though, so maybe not. It does have a thick looking cloth filter though, but again, it's been a while since I've tried or seen one.

      Delete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Which pads and grills do you prefer to use with the HE400SE?

    ReplyDelete
    Replies
    1. I am using Pali pads and the same ebay hifiman grills as HE6SE

      Delete
  4. Hi Antdroid, thanks a bunch for your description and measurement of the grill/pad mod. Unluckily neither the honeycomb grills nor the raw material are any longer available on ebay or anywhere else. Do you happen to know a source for these or something similar? Cheers, chi2

    ReplyDelete
    Replies
    1. I found a honeycomb cheap speaker grill that you can cut up to use for grill mod, but I am in south africa, so my link will not work for you. but maybe search for speaker grills, you might find something similar.

      I also found a brass mesh that I think might look good with the dark blue navy of the He6se v2

      Delete
    2. Hi, thanks for your input. Will look for speaker grill mesh. Cheers, chi2

      Delete
  5. Did you try the fenestrated sheepskin pads from Dekoni? or just the normal sheepskin? thanks

    ReplyDelete
  6. @antdroid do you have the name of the seller that makes the grill for the he6se? I want to reach out to see if he’ll mAke more.

    ReplyDelete
  7. Hi, @antdroid do you have the name and email address of the seller that makes the grill for the he6se? I would like to buy one.

    ReplyDelete

Post a Comment